2536 - Octagon Systems 2536 Digital I/O - 5600–96 digital I/O card,...
Request Quote
For Price
- Part Number:
- 2536
- Model Number:
- 2536
- Make:
- OCTAGON
- Lead Time:
- Available
- Qty In Stock:
- Available
Octagon Systems 2536 Digital I/O - 5600–96 digital I/O card, These lines interface with logic devices, switch inputs, LEDS, and industry–standard opto module racks. Simple Type: Digital I/O
The 5600 is a low–power Micro PC expansion card that provides 48 or 96 channels of digital I/O. All channels are TTL compatible, and are implemented with selected 82C55 chips. These lines will interface with logic devices, switch inputs, LEDs, and industry–standard opto module racks. The lines are grouped into six or twelve ports of eight lines each. For the 5600–48, four of those ports can be programmed as inputs or outputs on a port–wide basis. Two of the ports can be programmed as four lines of inputs and four lines of outputs each. These numbers are doubled for the 5600–96. Octagon has a variety of opto modules and termination boards for easy access for field wiring. Use isolator modules when driving or receiving signals from high voltage and/or high current devices. Opto–isolation also eliminates ground loops and significantly reduces the chance that noise will invade the system.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 48 TTL digital I/O lines
- 82C55 compatible
- Low cost per I/O
- Opto 22 compatible
- Programmable as inputs/outputs
Specifications
- BASE ADDRESS: Jumper–selectable base addresses of 100h, 110h, 120h, 130h, 140h, 150h, 160h, or 170h.
- Connectors: Two or four male 26–position, straight I/O connectors, Mates with Octagon CMA–26 cable, for direct connection to opto modules or termination blocks, On–board LED to show when a connector is accessed
- Digital I/O: 48 or 96 lines of TTL level digital I/O (5600–48 or 5600–96), Input low: –0.3V to +0.8V, Input high: 2V to Vcc, Output low: 0.4V maximum, Output high: 2.4V minimum, In output mode, can sink 2.5 mA at 0.4V and can source over 2.5 mA at 2.4V, When driving opto modules, the output can sink 15 mA at 1.0V, Jumper blocks pull all lines per connector (24 lines) high or low with a 10KO resistor, All 96 lines may be nonlatched inputs or latched
- ENVIRONMENTAL & POWER: –40° to 85° C operating, –50° to 85° C nonoperating, 5% to 95%, RH, noncondensing), 40g shock, 5g vibration, 3 axis, Size: 4.5" x 4.9", Micro PC form factor, Power: 5V ± 5% at 35 mA typical, 75 mA maximum
Applications
- None Available
Aliases
- None Available